Clik here to view.
Setting Up NAT with IPsec VPN
From Firmware 6.3 onwards, you can map a specific local network / IP address to another, and the packets received by remote gateway will appear to be coming from the mapped network / IP address. To...
View ArticleClik here to view.
Balance One and the 5-WAN License
A new add-on for the Balance One (BPL-ONE and BPL-ONE-CORE) is available now. To enable a more flexible and scalable network, we have created a software license to define 5 WANs on the Balance One....
View ArticleClik here to view.
Use Peplink’s firewall feature to block YouTube
As of firmware 6.3 Peplink Routers can block traffic from specific applications. This document describes how you can block YouTube using customized domains on a Peplink router. Instructions To begin...
View ArticleClik here to view.
Use Peplink’s firewall feature to block Netflix
As of firmware 6.3 Peplink Routers can block traffic from specific applications. This document describes how you can block YouTube using customized domains on a Peplink router. Instructions To begin...
View ArticleClik here to view.
Latest Peplink Hardware Revisions
Instructions for finding the Hardware Revision of your device. Peplink Balance Model Hardware Revision Date of Release Status Enclosure Balance 210/310 4th Fall 2014 Shipping Balance 305 2nd Early...
View ArticleClik here to view.
Configure Captive Portal in inControl2
Introduction This article describes step-by-step how to configure Captive Portal in InControl2. With captive portals you can easily offer internet to your guests and easily control connection time and...
View ArticleClik here to view.
Port Forwarding for SpeedFusion NAT Mode LAN Clients
As of Firmware 6.3.2, Peplink routers can designate ports for each of their LAN clients while running NAT on SpeedFusion. This ensures that remote devices will be able to reach each LAN client...
View ArticleClik here to view.
Peplink Balance access using the console port
This tutorial will help you connect your computer to a Peplink Balance router using the console port. Before you start Before you start you will need a RJ-45 to usb console cable; alternatively you can...
View ArticleClik here to view.
PPTP connection stopped working since upgrading to iOS10 or macOS Sierra
Apple has Removed Support for PPTP VPN for iOS 10 We have been contacted several times by Peplink customers who asked us why they are no longer able to setup or use a PPTP connection to our Peplink...
View ArticleClik here to view.
Speedtest vs Speedfusion
Difference in Speed One question that often comes up when evaluating SpeedFusion bonding performance is that Speedtest.net says that I have 10Mbps on this landline/4G LTE, but SpeedFusion says it is...
View Article
