Clik here to view.
Configure IPsec to Juniper SSG Firewall
This guide covers configuration an IPsec VPN between Peplink and Juniper SSG firewall. The example assumes the following settings: IPsec VPN Settings Peplink WAN IP Address 210.211.10.5 Peplink LAN...
View ArticleFirmware 6.1 Release Notes
Please note that devices need to be in warranty to upgrade to firmware 6.1. Click on any feature to learn more. Note: The Captive Portal of Firmware 6.1 does not currently support Guest Account Mode....
View ArticleConfigure IPsec to Cisco IOS using X.509 Authentication
This guide covers configuration of IPsec between Peplink and Cisco IOS devices using X.509 authentication. The example configuration assumes the following settings: IPsec VPN Settings Peplink WAN1 IP...
View ArticleClik here to view.
Firmware 6.1 Upgrade Guide
Firmware 6.1 is a major upgrade that adds significant functionality to your router. This firmware is free for devices running Firmware 6.X and for devices under warranty. If you are running Firmware...
View ArticleClik here to view.
Configure IPsec to Cisco IOS using Pre-shared Key Authentication.
This guide covers configuration of IPsec between Peplink and Cisco IOS devices using pre-shared key authentication. The example configuration assumes the following settings: IPsec VPN Settings Peplink...
View ArticleClik here to view.
Obtaining a Diagnostic Report from a Pepwave AP Device
Go through the following steps to obtain a Diagnostic Report from a Pepwave AP device: Connect to the Web Admin Interface with a web browser. Go to Command > Misc. Click the Proceed button under...
View ArticleClik here to view.
How to enable VLAN Trunk on LAN
The VLAN Trunk on LAN feature is supported in Firmware 6.1. You can enable it via the following steps. With this feature enabled, the LAN port(s) of the unit will become trunk port. 1. Go to “Network...
View ArticleSecurity Update – Peplink & Pepwave Products Are Not Vulnerable to The...
About Heartbleed The Heartbleed bug is a serious vulnerability in the security software used by millions of Web sites. According to www.openSSL.org, the affected versions are 1.0.1 and 1.0.2-beta of...
View ArticleWill the Proximity of USB Modems Cause Interference Between Them?
The Pepwave MAX 700 and On-The-Go feature multiple USB ports for fast and reliable mobile Internet. Having 4 USB modems in a compact enclosure, the modems are placed very close to each other. However,...
View ArticleClik here to view.
What Is The Difference Between Hardware Revisions of AP One 300M?
Product Name AP One AP One 300M AP One 300M Hardware Revision 1st 1st 2nd 2.4G High Power Wi-Fi ● ● 802.11a/n ● ● 802.11b/g/n ● ● ●
View ArticleWhat GNSS reporting protocols are supported on Peplink routers?
Certain models may not support both GPS and GLONASS at the same time. Please refer to your device’s specifications for more detail. List of supported NMEA 0183 message types: $GPGSV (Detailed satellite...
View ArticleClik here to view.
IP addresses to securely connect to InControl2
On December 31st, 2014, additional capacity will be added to InControl2. For administrators who manage their Peplink/Pepwave devices through a firewall, please update your list of IP addresses...
View ArticleSSID and AP Password for Peplink/Pepwave Wi-Fi Products
The default SSID is Peplink-last 4 digit of serial number or Pepwave-last 4 digit of serial numberE.g. Pepwave-4DSN The default AP password is the last 8 digit of the LAN MAC.E.g. If the LAN MAC of...
View ArticleClik here to view.
What Is The Difference Between Hardware Revisions of Peplink Balance 1350?
In early 2015, a new hardware revision of Peplink Balance 1350 is available. Please refer to the following for the differences across revisions. Hardware Revision Date of Release Enclosure 2nd Early...
View ArticleClik here to view.
How to add additional IPs on a WAN
Sometimes your ISP will provide you with additional external public IPs that can be used for the routing of additional services internally. To add additional IPs on a WAN port edit the WAN ports...
View ArticleClik here to view.
What Is The Difference Between Hardware Revisions of Peplink Balance 305?
In early 2015, a new hardware revision of Peplink Balance 305 is available. Please refer to the following for the differences across revisions. Hardware Revision Date of Release Enclosure 2nd Early...
View ArticleClik here to view.
Configuring IPSec to Cisco ASA 5505 v9.x Firewall using Pre-shared Key...
This guide covers configuring an IPsec VPN between Peplink and Cisco ASA firewall. The example assumes the following settings: IPSEC Network Simulation Diagram IPsec VPN Settings Peplink WAN1 IP...
View ArticleClik here to view.
Clik here to view.
What Is The Difference Between Hardware Revisions of Peplink Balance 580?
In mid 2014, a new hardware revision of Peplink Balance 580 was released. Please refer to the following for the differences across revisions. Hardware Revision Date of Release Enclosure 2nd Fall 2014...
View ArticleClik here to view.
How to Set Up Social Wi-Fi
Requirements: To set up a Social Wi-Fi Hotspot, you will need the following items: An InControl 2 account. A Facebook homepage. A supported device running Firmware 6.2.1 or above. Supported devices:...
View Article